When I go on some websites like google and many others, on firefox it says there is a dns error and the url appears to be megaclick.com. It%26#039;s not just firefox, I have tried internet explorer. All the other computers in my house have the same problem. How come I can%26#039;t get on to these sites, and how can I fix it.
I searched on Yahoo.com for an answer and I found a website with info that said click options and many other instructions, but when I click on that page it gives me a dns error too. I know there is a way to solve it by changing some settings I just don%26#039;t know how.|||From http://www.techspot.com/vb/topic85756.ht鈥?/a>
--
I had this very same problem, and I hope you have been able to solve it by now, but when I found out how very simple it is to get rid of I felt like the biggest moron ever. Very simple for the annoying problem:
In Firefox go to Tools
Go to Add ons
Simple have it uninstall the toolbar (You will have to restart FireFox)
And there you go problem gone. You dont need to go through hundreds of free scanners that dont work.
--
Good luck!
Sunday 5 June 2011
How to change LAN Network IP address when computer asks to restart every time but doesn't affect the change?
I have a Toshiba Laptop with Vista Basic loaded. I am using it since Feb%26#039;08. About a week back, my laptop is not changing the LAN IP. I use different IP in office and home. When we click network properties and try changing TCP/IPv4 settings for obtain IP and DNS automatically --%26gt; OK --%26gt; OK the system shows a message %26quot;You must shut down and restart your computer before new settings will take effect.
Do you want to restart your computer now?
YES NO
%26quot;
If we press YES the system reboots but change doesn%26#039;t take affect. Now please understand this message was not coming until last week. It seems some virus. But please provide a solution.|||I%26#039;d go along with the above answers. A proper test would be to open a command window and type
ipconfig /renew [return]
with post-Windows 2000 operating systems it is not normal to have to reboot to affect IP settings.|||Hmm, maybe a virus...
But first, try this:
Login using Windows Safe mode, then perform the above steps again to change your IP. Perhaps it matters the user ID used to change the IP settings. In this case, Safe mode, is administrator.|||I think you don%26#039;t have the admin rights.
If you have admin rights you will be able to do all the changes and it will definitely accept all the settings you change.
Do you want to restart your computer now?
YES NO
%26quot;
If we press YES the system reboots but change doesn%26#039;t take affect. Now please understand this message was not coming until last week. It seems some virus. But please provide a solution.|||I%26#039;d go along with the above answers. A proper test would be to open a command window and type
ipconfig /renew [return]
with post-Windows 2000 operating systems it is not normal to have to reboot to affect IP settings.|||Hmm, maybe a virus...
But first, try this:
Login using Windows Safe mode, then perform the above steps again to change your IP. Perhaps it matters the user ID used to change the IP settings. In this case, Safe mode, is administrator.|||I think you don%26#039;t have the admin rights.
If you have admin rights you will be able to do all the changes and it will definitely accept all the settings you change.
How can I change ALL of my wireless information.?
Such ***. IP address, %26lt;--That is EASY cake so I don%26#039;t really NEED this information BUT it would be helpful to let me know if there is a different way to change it along with all of the other information. Also I need to be able to change DNS servers. Physical or %26quot;MAC Address%26quot; Subnet mask (if possible) Not really sure about network settings or w/e I just really need to know all of this information and how to change it. So if you don%26#039;t mind, let me know what I CAN change and how to do it without damaging my network or my computer. --Thanks a ton and I would love to have some replies soon.|||I assume you are talking about your wireless router or adapter settings.
to change em go to
(windows xp)
Control panel %26gt;%26gt; Network Connections %26gt;%26gt; right click on your wireless connection icon %26gt;%26gt; Properties %26gt;%26gt; TCP/IP %26gt;%26gt; there you go all the settings are here.
Vista
Control Panel %26gt;%26gt; Network and sharing center %26gt;%26gt; View status of your active wireless connection %26gt;%26gt; Properties %26gt;%26gt; TCP/IP %26gt;%26gt;
(I dont have vista , so bear with some mistakes)
to change em go to
(windows xp)
Control panel %26gt;%26gt; Network Connections %26gt;%26gt; right click on your wireless connection icon %26gt;%26gt; Properties %26gt;%26gt; TCP/IP %26gt;%26gt; there you go all the settings are here.
Vista
Control Panel %26gt;%26gt; Network and sharing center %26gt;%26gt; View status of your active wireless connection %26gt;%26gt; Properties %26gt;%26gt; TCP/IP %26gt;%26gt;
(I dont have vista , so bear with some mistakes)
OpenDNS...Please Help! :'(?
I just bought a wireless Linksys WAG54G2 router. I%26#039;m using OpenDNS for web filtering of inappropriate materials. The problem is that anyone connected to my network can override my settings just by changing DNS on their computer.
I heard I can overcome this by blocking port 53 to all IP addresses except the IP of the router.
Can anyone help me with this? I have no idea how to do this. Please help! I%26#039;m desperate.|||Beethink IP blocker blocks DNS IP traffic.|||If you%26#039;re referring to a Linksys WAP54G v2.0, then you can load DD-WRT open source firmware onto the router, it will add additional commands and features. Simply add this to your Firewall script:
iptables -t nat -A PREROUTING -p udp -i br0 --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
iptables -t nat -A PREROUTING -p tcp -i br0 --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
You can try the above on the Linksys firmware, but I am not sure it will work.
I heard I can overcome this by blocking port 53 to all IP addresses except the IP of the router.
Can anyone help me with this? I have no idea how to do this. Please help! I%26#039;m desperate.|||Beethink IP blocker blocks DNS IP traffic.|||If you%26#039;re referring to a Linksys WAP54G v2.0, then you can load DD-WRT open source firmware onto the router, it will add additional commands and features. Simply add this to your Firewall script:
iptables -t nat -A PREROUTING -p udp -i br0 --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
iptables -t nat -A PREROUTING -p tcp -i br0 --dport 53 -j DNAT --to $(nvram get lan_ipaddr)
You can try the above on the Linksys firmware, but I am not sure it will work.
When i am on myspace.com, i am unable to view any photos, only red x's, how can i fix this problem?
after my ISP had DNS server problems, I was told to change my DNS adresses/settings by my ISP%26#039;s customer service, and now when i view or log on to myspace.com, i am unable to view any photos, only red x%26#039;s in their place What can i do to fix this problem?|||That is not a problem on your end. Whoeverys page you are trying to look at has the problem.|||you can%26#039;t really fix this problem.. it is a common ocurance on myspace i get it alot some times.... not to mention all the things beaing down or screwing up on there lately... but give your isp people a call and ask them if it was related to doing it.. i know pain in the butt.. but you will at least know if it is just myspace or you new addy and settings..
How do I change' ALL' the network setting on a MAC?
I am setting up a server Climate Monitor on a mac( which will be on site just for internet access for monitor.. but I can NOT find a way to change the subnet Mask or the Gate, I can only make changes the IP address.
I was told my the manufacturer that I could use a mac, But they have no paperwork on how to set it up on a mac.. so following the PC set up instructions leads me to this dead end, ( so far).
I see there is a automatic and manual tab in the Mac%26#039;s network window..but it does not allow me to change anything but IP and DNS settings|||You%26#039;re doing it wrong. System Preferences -%26gt; Network -%26gt; (Network interface) -%26gt; Advanced button -%26gt; TCP/IP -%26gt; Configure it manually.
I was told my the manufacturer that I could use a mac, But they have no paperwork on how to set it up on a mac.. so following the PC set up instructions leads me to this dead end, ( so far).
I see there is a automatic and manual tab in the Mac%26#039;s network window..but it does not allow me to change anything but IP and DNS settings|||You%26#039;re doing it wrong. System Preferences -%26gt; Network -%26gt; (Network interface) -%26gt; Advanced button -%26gt; TCP/IP -%26gt; Configure it manually.
How do I change web hosts with Google Apps?
I bought a domain from google apps but I want to use Weeby web hosting on it. I have never been able see my page and I still can%26#039;t once I changed the IP address to Weeblys (next to @ symbol) and the other line to www and www.weebly.com in DNS Settings. What do I need to do in order to be able to see it?|||Did you try using just the IP address %26quot;65.49.35.140%26quot; on your domain registrar?
You don%26#039;t say how long ago you registered your domain, it can take up to 48 hours to propagate.
check your dns settings at your registrar, that%26#039;s most probably your problem |||You need to know the name of your domain registrar (e.g., GoDaddy) in order for us to help you. |||To make a website you need a domain and webhosting.The best way to buy a domain for free is to purchase your domain and webhosting together. In this way it is possible to get your domain for free. Some webhosting companies offer this as a gift .Bluehost is the best one
http://www.bluehost.com/track/bluehostwe鈥?/a>
You don%26#039;t say how long ago you registered your domain, it can take up to 48 hours to propagate.
check your dns settings at your registrar, that%26#039;s most probably your problem |||You need to know the name of your domain registrar (e.g., GoDaddy) in order for us to help you. |||To make a website you need a domain and webhosting.The best way to buy a domain for free is to purchase your domain and webhosting together. In this way it is possible to get your domain for free. Some webhosting companies offer this as a gift .Bluehost is the best one
http://www.bluehost.com/track/bluehostwe鈥?/a>
Had virus and now when open file in windows the internet pops on with www.opendns.com on it. How can I fix it?
All of the virus scanners I have run says there%26#039;s no viruses left but I can%26#039;t even run internet explorer anymore because everytime I try to go to diff page open dns comes on so I changed default browser to firefox so the opendns.com page still pops open in firefox whether internet is open or not (if internet%26#039;s not open when I click on a file the internet pops open with same opendns page. It only pops up now when I click on a file in windows. When I%26#039;m on firefox browsing or whatever it doesn%26#039;t come on like it does with internet explorer which was the browser that was used when someone got the virus.) When opendns.com comes up it always says You tried to visit intsecureprof.microsoft.com, which is not loading (obviously I didn%26#039;t try to open any webpage.) If all of the viruses are gone it changed settings in computer and I can%26#039;t do system restore so I can%26#039;t figure out how to change them back.
I%26#039;ve used the bitdefender I have installed to scan it, spybot s%26amp;d, various online scanners like trend micro and bitdefender and everything says it is now clean.|||Eset Nod32 try this antivirus your have a rootkit virus on your computer nod32 clean it perfectly
http://www.eset.com|||When you performed your scans did you do them in Safe Mode?
If you didnt then try this:
Hit Ctrl+Alt+Delete and open the task manager.
Stop all processes with a bunch of numbers in them.
Go to Start%26gt;Computer%26gt;C: drive%26gt;Program Files%26gt;Temp files, and delete them all.
Empty the recycle bin.
Then go to Start%26gt;Run%26gt;type %temp% and delete all of those.
Empty the recycle bin again.
Then restart the computer, tap the F8 key while it is booting up, then choose %26quot;Safe mode with networking%26quot;.
Download Malwarebytes from here:
http://malwarebytes.org/
When it asks you where you would like to save it, change the %26quot;mbam_setup.exe%26quot; file to xxxxx.exe.
Then install it, update it, and run a full scan. Get the free version.
Now download SpyBot Search and Destroy from here:
http://www.safer-networking.org/index2.h鈥?/a>
Update, Immunize, then scan %26amp; Fix.
Download CCleaner (www.ccleaner.com) this will clean up your computer from cookies, temporary files etc, it will also clean your registry for you.
Update your AV regularly and run malware, spyware and AV scans regularly.
Good Luck
I%26#039;ve used the bitdefender I have installed to scan it, spybot s%26amp;d, various online scanners like trend micro and bitdefender and everything says it is now clean.|||Eset Nod32 try this antivirus your have a rootkit virus on your computer nod32 clean it perfectly
http://www.eset.com|||When you performed your scans did you do them in Safe Mode?
If you didnt then try this:
Hit Ctrl+Alt+Delete and open the task manager.
Stop all processes with a bunch of numbers in them.
Go to Start%26gt;Computer%26gt;C: drive%26gt;Program Files%26gt;Temp files, and delete them all.
Empty the recycle bin.
Then go to Start%26gt;Run%26gt;type %temp% and delete all of those.
Empty the recycle bin again.
Then restart the computer, tap the F8 key while it is booting up, then choose %26quot;Safe mode with networking%26quot;.
Download Malwarebytes from here:
http://malwarebytes.org/
When it asks you where you would like to save it, change the %26quot;mbam_setup.exe%26quot; file to xxxxx.exe.
Then install it, update it, and run a full scan. Get the free version.
Now download SpyBot Search and Destroy from here:
http://www.safer-networking.org/index2.h鈥?/a>
Update, Immunize, then scan %26amp; Fix.
Download CCleaner (www.ccleaner.com) this will clean up your computer from cookies, temporary files etc, it will also clean your registry for you.
Update your AV regularly and run malware, spyware and AV scans regularly.
Good Luck
How do I transfer my dns hosting settings?
I have a domain name with www.1and1.com. I am trying to set it up with adsence but google says I don%26#039;t have a cname record. I went to everydns.com and fixed that, but then when I went back to 1%26amp;1.com to change my nameservers it didn%26#039;t let me. It said %26quot;1%26amp;1 name server (Unmodifiable)%26quot;. In this case what do I have to do to change my nameservers.|||I used 1%26amp;1 back in the day and everything was difficult. I don%26#039;t think I ever had the specific issue you are describing however.
It is definitely a 1%26amp;1 issue so I would %26quot;attempt%26quot; to contact their support and allow you to modify it. There may also be some sort of %26quot;lock%26quot; on your domain settings if you can find it and unlock it (for some reason I think I remember having to do this). I don%26#039;t go thru 1%26amp;1 so I can%26#039;t %26quot;mess%26quot; with it to see what you need to do, but I%26#039;d start with their FAQ and knowledge base first then try to get a hold of them.
Before I started hosting everything myself (DNS %26amp; WWW) I would get the domain with a simple domain registrar, host my DNS with xpertdns.com (standalone DNS hosting) and host my sites elsewhere. That way nothing is tied in together, giving you full control over everything.
Sorry I couldn%26#039;t be more help than what I gave you.
It is definitely a 1%26amp;1 issue so I would %26quot;attempt%26quot; to contact their support and allow you to modify it. There may also be some sort of %26quot;lock%26quot; on your domain settings if you can find it and unlock it (for some reason I think I remember having to do this). I don%26#039;t go thru 1%26amp;1 so I can%26#039;t %26quot;mess%26quot; with it to see what you need to do, but I%26#039;d start with their FAQ and knowledge base first then try to get a hold of them.
Before I started hosting everything myself (DNS %26amp; WWW) I would get the domain with a simple domain registrar, host my DNS with xpertdns.com (standalone DNS hosting) and host my sites elsewhere. That way nothing is tied in together, giving you full control over everything.
Sorry I couldn%26#039;t be more help than what I gave you.
Ps3 online dns problems?
since we cut the internet awhile back i have been using my nieghbors wireless internet, at first it worked great since they have no security on it, but all of a sudden the network settings changes. it will change the ip to a new one and under it it says Private Networks Only in parenthesis. any ideas on how to fix it, so that i can play Online.? like how to mess with the settings and stuff?|||It%26#039;s their internet, their settings. They most likely noticed you were using it for free and put a password on their network.
Bottom Line: Pay for high speed and router/modem.
Bottom Line: Pay for high speed and router/modem.
Ipod touch won't connect to wifi?
I have an Ipod Touch 8GB 3rd generation. I can%26#039;t figure out how to connect my ipod to the internet, i don%26#039;t think that it is the normal problem that people have because i tried to change the DNS to the recommended 208.67.222.222 but it didn%26#039;t work. The thing that is wrong is when i try to connect to my home network it pops up and says %26quot;unable to join network--dismiss%26quot;. I really don%26#039;t understand this because I used to be able to get on there fine, and all the sudden it stopped working. I haven%26#039;t changed any settings except after it stopped working when i put in the new DNS number, and i have full signal from my wifi. Please Help! thanks!|||The first thing to try is to Reset the Network Settings and re-enter the password if you haven%26#039;t already. Tap Settings%26gt;General%26gt;Reset%26gt;Reset Network Settings. It will reset the ipod (showing the Apple logo) then back to the home screen. Tap on your network if it locates it and re-enter the password.
If that doesn%26#039;t work, try these articles from Apple:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there%26#039;s no address listed for the device
http://support.apple.com/kb/ts1559
Hope it helps.|||this might work but i%26#039;m not sure...
go to settings%26gt;general%26gt;reset%26gt;reset network settings
If that doesn%26#039;t work, try these articles from Apple:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there%26#039;s no address listed for the device
http://support.apple.com/kb/ts1559
Hope it helps.|||this might work but i%26#039;m not sure...
go to settings%26gt;general%26gt;reset%26gt;reset network settings
Could not connect to DNS server, and more! 10 points :) good luck!?
Heres the deal,
About 2 weeks ago i purchased a new HP laptop, I could connect to the internet and maintain a connection perfectly fine, but about 3 days ago the internet would cut out and reconnect within a few seconds about every 15-40 minutes. I%26#039;m sure you all know how this could be rather annoying.
Absolutly nothing had changed in hardware or software specs before this issure started to occure. At first I thought it could be my wireless adapter or power management settings could have changed somehow, but i also have another computer connected directly to the router and that too loses connection at the same time my laptop does. So while it was dissconnected I did a troubleshoot on it and it came up with could not connect to the dns server. I tried changing my dns host to open dns.com but to no avail.
My laptop has windows 7 installed and my other computer has windows vista. My internet service provider is telus, and my router is a 2wire 2700HG-e. I have tried adjusting particular things in the router itself such has chaning the upstream mtu to a lower value and manually putting in a dns address.
Any help is greatly appreciated. Thanks for your input|||Surely this is a problem for your Internet Service Provider to resolve. I take it you are getting DNS from your ISP?
You need to go into your router settings when it%26#039;s connected and find out the DNS servers, IP addresses. There should be a primary DNS server, a secondary DNS server and possibly a tertiary DNS server.
Write these down and then open a DOS command prompt.
Click in the Start Search box and type cmd, followed by Enter
On the command prompt type:
ping -t %26lt;dns server IP address%26gt;
Where %26lt;dns server IP address%26gt; is the IP address of your primary, secondary or tertiary DNS server.
Leave it pinging and see what sort of reply times you are getting from the DNS server and if you get any timeouts. A timeout will be when the ping does not reply and you get a %26quot;Request timed out%26quot;.
If you are getting reply times much over 75ms then you should contact your ISP. If you are getting lots of timeouts you should contact your ISP. You can leave the ping running to see what kind of times you are getting over a prolonged period.
Next test you can do is to open another command prompt and type nslooukp and press enter.
You%26#039;ll get a screen that says something like:
Default server: %26lt;servername%26gt; %26lt;server address%26gt;
Address: %26lt;server IP%26gt;
%26gt;
On the prompt type www.google.com then press enter.
See how long it takes to come back with a reply. The reply should be instantaneous. If the reply takes longer than 2 seconds you should contact your ISP and tell them that your DNS lookups are taking too long to resolve.
It seems from a quick search on Google that many people are having issues with DNS servers of the Telus ISP - so my initial feeling is that the issue is with them. It shouldn%26#039;t be up to you to resolve this yourself, they should be sorting it out. If you cannot get this issue resolved, change providers.
Hope these tests help you resolve your issue.|||tell telus to get off their a$$ and fix the line to your house, 15-40 minutes? that sounds like a line issue to me, otherwise I would assume router or modem are on the fritz. Try to update your routers firmware verison(if available).good luck
About 2 weeks ago i purchased a new HP laptop, I could connect to the internet and maintain a connection perfectly fine, but about 3 days ago the internet would cut out and reconnect within a few seconds about every 15-40 minutes. I%26#039;m sure you all know how this could be rather annoying.
Absolutly nothing had changed in hardware or software specs before this issure started to occure. At first I thought it could be my wireless adapter or power management settings could have changed somehow, but i also have another computer connected directly to the router and that too loses connection at the same time my laptop does. So while it was dissconnected I did a troubleshoot on it and it came up with could not connect to the dns server. I tried changing my dns host to open dns.com but to no avail.
My laptop has windows 7 installed and my other computer has windows vista. My internet service provider is telus, and my router is a 2wire 2700HG-e. I have tried adjusting particular things in the router itself such has chaning the upstream mtu to a lower value and manually putting in a dns address.
Any help is greatly appreciated. Thanks for your input|||Surely this is a problem for your Internet Service Provider to resolve. I take it you are getting DNS from your ISP?
You need to go into your router settings when it%26#039;s connected and find out the DNS servers, IP addresses. There should be a primary DNS server, a secondary DNS server and possibly a tertiary DNS server.
Write these down and then open a DOS command prompt.
Click in the Start Search box and type cmd, followed by Enter
On the command prompt type:
ping -t %26lt;dns server IP address%26gt;
Where %26lt;dns server IP address%26gt; is the IP address of your primary, secondary or tertiary DNS server.
Leave it pinging and see what sort of reply times you are getting from the DNS server and if you get any timeouts. A timeout will be when the ping does not reply and you get a %26quot;Request timed out%26quot;.
If you are getting reply times much over 75ms then you should contact your ISP. If you are getting lots of timeouts you should contact your ISP. You can leave the ping running to see what kind of times you are getting over a prolonged period.
Next test you can do is to open another command prompt and type nslooukp and press enter.
You%26#039;ll get a screen that says something like:
Default server: %26lt;servername%26gt; %26lt;server address%26gt;
Address: %26lt;server IP%26gt;
%26gt;
On the prompt type www.google.com then press enter.
See how long it takes to come back with a reply. The reply should be instantaneous. If the reply takes longer than 2 seconds you should contact your ISP and tell them that your DNS lookups are taking too long to resolve.
It seems from a quick search on Google that many people are having issues with DNS servers of the Telus ISP - so my initial feeling is that the issue is with them. It shouldn%26#039;t be up to you to resolve this yourself, they should be sorting it out. If you cannot get this issue resolved, change providers.
Hope these tests help you resolve your issue.|||tell telus to get off their a$$ and fix the line to your house, 15-40 minutes? that sounds like a line issue to me, otherwise I would assume router or modem are on the fritz. Try to update your routers firmware verison(if available).good luck
I need help on flushing the dns. The ipconfig /flushdns command is not completely clearing the DNS.?
Hi. I changed the DNS servers for my website. I visited my website on my computer. I try to connect to the website, its been 24 hours since I changed the servers, and I still receiving the old page. I know that it isn%26#039;t the hosting server because I visited the page from another computer and got the right page. On my computer I tried the ipconfig /flushdns command and it says it was successfully flushed but the page is still the old one. I cleared cookies and files and still receive the old page. I need to know how to do a hard reset on the dns servers. I need to completely wipe out all DNS settings. I am running Windows XP Pro.
Thanks|||I once had that problem. On command propmt i did this: netsh winsock reset and that did the trick. Not sure if that was what helped but after flushind dns several times i did that and it was all ok. Hope thats the case for you.|||After giving ipconfig /flushdns, give th command ipconfig /registerdns.
I think it will solve your problem.|||Also clear history, cookies, and old files in the Internet explorer.
Thanks|||I once had that problem. On command propmt i did this: netsh winsock reset and that did the trick. Not sure if that was what helped but after flushind dns several times i did that and it was all ok. Hope thats the case for you.|||After giving ipconfig /flushdns, give th command ipconfig /registerdns.
I think it will solve your problem.|||Also clear history, cookies, and old files in the Internet explorer.
How to get Windows Vista Login Screen?
I recently moved into new accomodation, whereby I was supposed to have the internet-access ready.However, when I plugged in the ethernet cable, it wasn`t working since my DNS settings on the laptop were configured to manual. It took a little over a week for me to have the idea of changing these DNS settings.
Thereafter, it worked. It only lasted for a few days, until when I tried to switch on the laptop, no blue screen for the login appeared. This was unusual.
I can see the startup loader for Windows Vista. However just after, there is no Windows Logo or sound and the screen remains black until a start up repair option is requested. The System recovery Options follow, where I usually choose System restore because I do not want to lose any of my files.
I know my laptop is working fine because I have managed to log in a few times using system restore. I`m aware it`s a windows update issue since I missed updates for a week - since I had no internet access. Therefore, it`s a knock-on effect.
I want to know if I did a full back up of all my files and reinstalled Windows Vista on the same computer - would that be a good idea? Will there be retrieval of my back up files to a newly installed Vista on the same computer?
OR - is there anything else I can do? Microsoft Word was working 2 weeks ago - now, it`s not because the OS is currently not configured to run the application.|||sounds to me this is a malware problen, let me tell you some of those malware programs sneakin with a program or e mail or back door and they are mind boggleing, try this, go to search bar online and type malware antimalware select malwarebytes.com download their free program, install and start scan, I had to do this and what this program found cannot be believed, even a virus program couldn%26#039;t screw up your comp any more that malware. It will let you delete all of the bad iltems and reboot This will probably get you back on your feet, worth trying. it helped me so much I went back and bought the program only 24.95 and let me tell you it was worth atleast twilce the money
hope this helpa nothing ventured nothing gained
Billy R.
Thereafter, it worked. It only lasted for a few days, until when I tried to switch on the laptop, no blue screen for the login appeared. This was unusual.
I can see the startup loader for Windows Vista. However just after, there is no Windows Logo or sound and the screen remains black until a start up repair option is requested. The System recovery Options follow, where I usually choose System restore because I do not want to lose any of my files.
I know my laptop is working fine because I have managed to log in a few times using system restore. I`m aware it`s a windows update issue since I missed updates for a week - since I had no internet access. Therefore, it`s a knock-on effect.
I want to know if I did a full back up of all my files and reinstalled Windows Vista on the same computer - would that be a good idea? Will there be retrieval of my back up files to a newly installed Vista on the same computer?
OR - is there anything else I can do? Microsoft Word was working 2 weeks ago - now, it`s not because the OS is currently not configured to run the application.|||sounds to me this is a malware problen, let me tell you some of those malware programs sneakin with a program or e mail or back door and they are mind boggleing, try this, go to search bar online and type malware antimalware select malwarebytes.com download their free program, install and start scan, I had to do this and what this program found cannot be believed, even a virus program couldn%26#039;t screw up your comp any more that malware. It will let you delete all of the bad iltems and reboot This will probably get you back on your feet, worth trying. it helped me so much I went back and bought the program only 24.95 and let me tell you it was worth atleast twilce the money
hope this helpa nothing ventured nothing gained
Billy R.
How do I configuring Server 2003 with client systems to speed up login time?
I am trying to setup a basic internet cafe. I have a server with Server 2003 Enterprise and other client machines all connected to a router with an internet connection. I am able to add users to the domain with active directory and login as the user on other systems however when I try to login the time it takes to login can take up to 20 minutes. I have the TCP\IP of the server set to obtain an ip automatically and obtain DNS server automatically. Do I need to change these settings on the server? If so what should I change them to? Is it also ok to have the server and client systems all connected to the same router? Thanks for the info!|||For starters - the server needs a static IP - something like 192.168.0.10 would be ok. You also need it to have a static gateway - which would be the address of your router - I am guessing 192.168.0.1.
Perhaps you can set the server up as the Domain Controller - there is a wizard to walk you through this set up. Let the server assign the IP%26#039;s through DHCP NOT the router. To do this however - you are going to need a static IP from your ISP - extra money. The router can then be set up with just as a gateway.
The server and clients connected to the same router should be ok. The clients then would get their IP%26#039;s and DNS automatically.
Hope this helps and has not left you more confused.
Perhaps you can set the server up as the Domain Controller - there is a wizard to walk you through this set up. Let the server assign the IP%26#039;s through DHCP NOT the router. To do this however - you are going to need a static IP from your ISP - extra money. The router can then be set up with just as a gateway.
The server and clients connected to the same router should be ok. The clients then would get their IP%26#039;s and DNS automatically.
Hope this helps and has not left you more confused.
Help i cant connect to xbox live for 360. well i dont know how can somebody tell me?
ok so im trying to conect but i dont know how. i go to network settings and then there is basic settings and additional settings. on basic settings there is 2 things i can choose and here is what the first 1 has in it.
ip settings
ip address
subnet mask
gateway
the second box has
dns settings
primary dns server
secondary dns server
thats basic settings.
on additional settings. the 1 box has
PPPoE settings
user name p
password
service name
2 box has
advanced settings
host name
alternate mac address.
thats it. i am using the verizion mi-fi. the computer i am using is the mac.
do i have to use the computer to get on xbox live or can i just use the mi-fi? if i do have to use the computer then how do i connect with the computer. i have the xbox 360 wireless adapter with the light red.
when u go onto advanced settings there is
alternate mac address
host name
for basic settings it will ask u automatic or manual. its says on automatic
allow a router, gateway, or other device to automatically assign an IP address to your console.; recommended.
then on manual it says
manually assign an IP address to your console.
same thing with the dns settings just change IP to DNS.j
just plz help me i really want to use xbox live so i can play gta 4 or halo3. thank you so much|||http://www.xbox.com/en-US/live/joinlive.鈥?/a>|||You need the wareless adapter for wireless internet.
ip settings
ip address
subnet mask
gateway
the second box has
dns settings
primary dns server
secondary dns server
thats basic settings.
on additional settings. the 1 box has
PPPoE settings
user name p
password
service name
2 box has
advanced settings
host name
alternate mac address.
thats it. i am using the verizion mi-fi. the computer i am using is the mac.
do i have to use the computer to get on xbox live or can i just use the mi-fi? if i do have to use the computer then how do i connect with the computer. i have the xbox 360 wireless adapter with the light red.
when u go onto advanced settings there is
alternate mac address
host name
for basic settings it will ask u automatic or manual. its says on automatic
allow a router, gateway, or other device to automatically assign an IP address to your console.; recommended.
then on manual it says
manually assign an IP address to your console.
same thing with the dns settings just change IP to DNS.j
just plz help me i really want to use xbox live so i can play gta 4 or halo3. thank you so much|||http://www.xbox.com/en-US/live/joinlive.鈥?/a>|||You need the wareless adapter for wireless internet.
Help! I messed up my DNS Settings! How can I configure it?
I had to re-install my computer, and when I did, I immediately started Downloading a game called %26quot;Maple Story%26quot; After that, I tried opening it and a window pops up saying %26quot;Game Guard is attempting to establish DNS%26quot; or something like that. It has 3 options, always allow from this port, never for this port, or manually set-up firewall. I meant to choose always allow from this port, but accidentally chose never for this port and clicked ok. How can I change this?|||It looks like you have a firewall that is going to block your application. Since there isn%26#039;t much info on this topic... i think you should search for any kind of firewall settings around the program %26quot;Game Guard%26quot; and see where you can go from there.|||Try doing a system restore with the restore utility in the tools menu.
OpenDNS...Help me please! :'(?
I just started using OpenDNS for web filtering, but some users on my network seem to override the new router settings by changing DNS on their computers.
I use a D-Link DSL-500T router (which is a bit old) connected to a wireless TP-Link access point.
How can I stop them from overriding OpenDNS router settings, knowing that I have no access to these computers.
Any help would be appreciated.
Thank you!|||Not really much you can do with it unless you can lock their computer from making the changes or setting up a Domain Controller with DNS and rerouting.
I use a D-Link DSL-500T router (which is a bit old) connected to a wireless TP-Link access point.
How can I stop them from overriding OpenDNS router settings, knowing that I have no access to these computers.
Any help would be appreciated.
Thank you!|||Not really much you can do with it unless you can lock their computer from making the changes or setting up a Domain Controller with DNS and rerouting.
Why won't my laptop connect to Internet via bt he hub?
Basically my laptop either says limited connection or says it connected but no Internet loads! When I run diagnose it says that dns is working properly? I am able to connect on my iPhone but not laptop! I have tried changing settings on home hub but nothing works. My xbox also says tht my NAT is on strict, how to I change it? And I%26#039;m runing windows 7.|||Log on to BT.COM, click on AT HOME, then browse for answers, if no joy you can open up a live-chat session with a BT rep, they should take ownership and point you in the right direction
Why can I not connect to internet after changing my IP Address?
Hello. I have a windows Vista. I recently was banned off of gamebattles, along with my IP Address. I attempted to change my IP through the network and sharing center, protocol 4, and manually changing my IP and DNS settings. But afterward, my internet connection was Local only. Does anyone know how to solve this? If not, can anyone help me in the case of joining teams on a proxy for gamebattles wtihout getting the response (Please Provide Your XBL Gamertag)|||IP address (or public IP address) usually is assigned automatically by DHCP server of your ISP. This is out of your control.
If your computer is behind a router, it will pick up a private IP address (i.e. 192.168.0.157), while externally it uses a public IP address (i.e.119.82.44.190). It is likely that your public IP is banned from that game service. Change your private IP address is no use.
There are many methods to ban others, they can banned by IP address, Cookies, Unique Token, Common Information and Multiple Options.
Suppose, it is banned by IP address, you can do the step below.
1) Clear your Cookies.
2) Turn off your modem (and router if you also use it) for 10 to 15 seconds and restart it. And DHCP server of your ISP will likely re-new your computer with a new IP address. And then, the problem is solved.
If it is banned by other methods, visit http://webipaddress.net/resources/i-have鈥?/a> for more solutions.|||Your public IP, the one that is banned, is assigned to you by your ISP. You CANNOT change that, else your ISP will not recognize you as their customer, and cut off internet access. Only by using your ISP%26#039;s assigned IP address, are you allowed to connect to their network. Your ISP is in control of that IP, you are not....
Some web sites can detect proxy use, and ban you based on that alone....|||You could try releasing the IP from your router (or PC if you don%26#039;t use a router). Release it before going to bed or work and hopefully someone else will pick it up. Then once you renew your IP later on you%26#039;ll get a new one.|||Change your internal IP all you want, it wont matter. People dont see you with the IP you see...such as 192.168.1.100 or whatever. The IP the world sees you with is your external IP which is handled by your ISP. So changing your internal IP does NOTHING!!! As for DNS, that doesnt matter either.
Overall, you%26#039;re kinda outta luck unless you change providers.
If your computer is behind a router, it will pick up a private IP address (i.e. 192.168.0.157), while externally it uses a public IP address (i.e.119.82.44.190). It is likely that your public IP is banned from that game service. Change your private IP address is no use.
There are many methods to ban others, they can banned by IP address, Cookies, Unique Token, Common Information and Multiple Options.
Suppose, it is banned by IP address, you can do the step below.
1) Clear your Cookies.
2) Turn off your modem (and router if you also use it) for 10 to 15 seconds and restart it. And DHCP server of your ISP will likely re-new your computer with a new IP address. And then, the problem is solved.
If it is banned by other methods, visit http://webipaddress.net/resources/i-have鈥?/a> for more solutions.|||Your public IP, the one that is banned, is assigned to you by your ISP. You CANNOT change that, else your ISP will not recognize you as their customer, and cut off internet access. Only by using your ISP%26#039;s assigned IP address, are you allowed to connect to their network. Your ISP is in control of that IP, you are not....
Some web sites can detect proxy use, and ban you based on that alone....|||You could try releasing the IP from your router (or PC if you don%26#039;t use a router). Release it before going to bed or work and hopefully someone else will pick it up. Then once you renew your IP later on you%26#039;ll get a new one.|||Change your internal IP all you want, it wont matter. People dont see you with the IP you see...such as 192.168.1.100 or whatever. The IP the world sees you with is your external IP which is handled by your ISP. So changing your internal IP does NOTHING!!! As for DNS, that doesnt matter either.
Overall, you%26#039;re kinda outta luck unless you change providers.
How do I use my own domain name for the website I have created?
I have created a free website with say www.xyz.com that will be www.percyboy.xyz.com and I want to use my own domain name www.owndomain.com
I dont get this instructions below given by the free xyz company.Although it seems to make sense my registrar has different settings that dont match with the following instructions. My domain is registered with 1%26amp;1 and it only gives me the option of changing CNAME which I guess should be www. Can someone explain this to me in plain english please?
%26quot;Sign in to your hosting account and go to the page where you can change your DNS settings. This page is usually called %26quot;DNS Management%26quot; or %26quot;Name server management%26quot; (If you can%26#039;t find the settings contact your web host support desk and ask them to set it up for you).
Delete all records of type A and CNAME associated with the %26quot;www%26quot; name and %26quot;files%26quot; name. (Make sure you backup any projects associated with this domain because it may become inaccessible after you make these changes).
Create new records of type CNAME according to the information in the table below. Name Type Value
www CNAME percyboy.xyz.com.
files CNAME percyboy.xyz.com. %26quot;
Thank you for your help|||I think %26quot;If you can%26#039;t find the settings contact your web host support desk and ask them to set it up for you%26quot; is your answer.|||coding for project-
http://codingforum.info/
I dont get this instructions below given by the free xyz company.Although it seems to make sense my registrar has different settings that dont match with the following instructions. My domain is registered with 1%26amp;1 and it only gives me the option of changing CNAME which I guess should be www. Can someone explain this to me in plain english please?
%26quot;Sign in to your hosting account and go to the page where you can change your DNS settings. This page is usually called %26quot;DNS Management%26quot; or %26quot;Name server management%26quot; (If you can%26#039;t find the settings contact your web host support desk and ask them to set it up for you).
Delete all records of type A and CNAME associated with the %26quot;www%26quot; name and %26quot;files%26quot; name. (Make sure you backup any projects associated with this domain because it may become inaccessible after you make these changes).
Create new records of type CNAME according to the information in the table below. Name Type Value
www CNAME percyboy.xyz.com.
files CNAME percyboy.xyz.com. %26quot;
Thank you for your help|||I think %26quot;If you can%26#039;t find the settings contact your web host support desk and ask them to set it up for you%26quot; is your answer.|||coding for project-
http://codingforum.info/
I changed my settings on my router and now my ps3 won't connect to the internet, how could I fix it?
I set up a static ip address to map ports correctly for Utorrent and now my ps3 cant connect to my routert anymore. i can%26#039;t figure it out at all, it wont recognize it because the ip is different and the dns things. does anyone know how i could fix it?|||For the PS3 - you need to provide a DNS server. Just use the LAN IP address of the router. You also need to provide the LAN IP of the default gateway, which is in turn your router.
Give the PS3 an IP
Subnet Mask: 255.255.255.0
Default Gateway: LAN IP of Router
DNS (just use one): LAN IP of router
If your router supports uPNP portforwarding, then enable it and enable uPNP in utorrent and go back to DHCP on the router and obtain IP address from the router on all clients including the PC and PS3.
Give the PS3 an IP
Subnet Mask: 255.255.255.0
Default Gateway: LAN IP of Router
DNS (just use one): LAN IP of router
If your router supports uPNP portforwarding, then enable it and enable uPNP in utorrent and go back to DHCP on the router and obtain IP address from the router on all clients including the PC and PS3.
I changed my settings on my router and now my ps3 won't connect to the internet, how could I fix it?
I set up a static ip address to map ports correctly for Utorrent and now my ps3 cant connect to my routert anymore. i can%26#039;t figure it out at all, it wont recognize it because the ip is different and the dns things. does anyone know how i could fix it?|||If you turned NAT off (to use a static IP on your PC) this will be the cause.
You may need to give your PS3 a static IP address too, or re-enable NAT on the router and use Port-Forwarding and UPnP to allow UTorrent to connect.|||Hi, check your settings and if you have to re-enter the settings for your ps3|||I%26#039;d say enable UPNP on ur PS3 through your router. This will open up alot of more data to be streamed!
You may need to give your PS3 a static IP address too, or re-enable NAT on the router and use Port-Forwarding and UPnP to allow UTorrent to connect.|||Hi, check your settings and if you have to re-enter the settings for your ps3|||I%26#039;d say enable UPNP on ur PS3 through your router. This will open up alot of more data to be streamed!
Need help with Linux Ubuntu internet connection!?
Hey, we just had a problem at home with our internet connection where we had to alter our DNS settings in order to hook our computers up online. This has worked fine for 2 PCs, a MacBook, and the Xbox 360. However, my brother uses a Linux Ubuntu Hardy Heron 8.10 and we cannot figure out how to change the DNS settings. Does anybody know?|||The DNS settings are in the network settings manager, under the connection you want to use.
Unlock the panel, enter the connection settings, and add DNS servers.
Unlock the panel, enter the connection settings, and add DNS servers.
How do I get hold of DNS settings/MX Records of my domain name?
I am trying to change the company who hosts my domain name and I am being asked for the DNS settings/MX Records but I have no idea how I get hold of them.|||Either your web host will have access to it or the company you registered your domain name through. Either login or have your host access your DNS records. You don%26#039;t have to change domain registrars even though you are switching hosting companies as long as your domain name is registered with someone else.|||You can use http://www.magic-net.nl/dns-lookup.php to find all your DNS records.|||The company you are transferring to should be able to request that information from your current provider. You may have to send a letter to both to inform them of the right for the new provider to get that information, though usually it%26#039;s not necessary.
Otherwise, check with your current provider - there should be a login/user account somewhere on their company web pages, where you can log in and read your DNS records
Otherwise, check with your current provider - there should be a login/user account somewhere on their company web pages, where you can log in and read your DNS records
How to connect these networks?
How to connect these networks ?? Cheap and best solution ?? Kindly Help?
1st network having IP in series (16 computers)- This is my branch office
IP 10.1.241.xxx
subnet as 255.255.248.0
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt;PC--%26gt;switch--%26gt;PC .........
IInd network having IP in series (19 computers) - This is my office
IP 192.168.0.XXX
Subnet mask 255.255.255.0
wired and having static IP
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt;PC--%26gt;switch--%26gt;PC .........
These two networks are nearby and about 15 mtrs apart (opposite buildings) and no servers are there. i want to connect all these PC together. so that they are accessible to each other.
Is there any way to connect above two networks so that we may access all the computers existing on both the networks. Shall we require a router for that.
Or it may be achieved by putting IPs in DNS server address preffered IP and alternate server address IP ie. starting IP our network in preferred and other networks starting IP as alternate.
i did try to connect the networks with a Ethernet wire through the vacant ports of existing switches and changing DNS settings but was unsuccessful.
Kindly assist please.|||My understanding of this is that the easiest way to do this is to have both networks in the same IP block. Set router1 in building 1 to 10.1.1.1 for example and have the DNS turned on.
Then put a switch or turn off DNS in router2 in building 2. Run an ethernet wire from one of the LAN ports on router1 to the WAN port in the switch or router2. Router1 will reassign IP addresses to all units in both groups. You will have to turn off all computers and restart them one at a time.
Another choice is to set router2 at 10.1.250.1 and turn its DNS on. Still run the ethernet wire from a LAN router1 port to the WAN port in router2. This will assign numbers 10.1.1.2 up (you can limit this to perhaps 100 computers) for the building 1. This will assign 10.1.250.2 up to computers in building 2.|||I will recommend you purchase two routers. Two Cisco 2600 routers (as an example only) could be configured to accomplish your task. Without routers your two networks can not communicate with each other.
Altering the DNS will not help either in that scenario.
Example: Router 1 Location 1
You set up a network. 10.1.241.x subnet 255.255.248.0 (10.1.241.x/21)
You would configure R1 to that network but then you would also add another network to connect the two routers together - 10.1.1.1 255.255.255.0
Now - 10.1.1.1 255.255.255.0 is going to connect to router two like such: 10.1.1.2 255.255.255.0 (notice host on first router is 1 and 2nd router is 2 )
You would repeat the process on the second router but you would use (obviously) the IP%26#039;s that pertain to that routers network.
NOT EXACT but here is an idea on Cisco router:
I%26#039;m using different IP scheme too.
R1#: interface fa0/0
ip addr 192.168.1.1 255.255.248.0
router rip
network 192.168.1.1
network 10.1.0.0
no shutdown
R2# interface fa0/0
ip addr 192.168.2.1 255.255.255.0
router rip
network 10.1.0.0
again, I left out a LOT of commands but this was simply just to give you an idea
1st network having IP in series (16 computers)- This is my branch office
IP 10.1.241.xxx
subnet as 255.255.248.0
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt;PC--%26gt;switch--%26gt;PC .........
IInd network having IP in series (19 computers) - This is my office
IP 192.168.0.XXX
Subnet mask 255.255.255.0
wired and having static IP
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt;PC--%26gt;switch--%26gt;PC .........
These two networks are nearby and about 15 mtrs apart (opposite buildings) and no servers are there. i want to connect all these PC together. so that they are accessible to each other.
Is there any way to connect above two networks so that we may access all the computers existing on both the networks. Shall we require a router for that.
Or it may be achieved by putting IPs in DNS server address preffered IP and alternate server address IP ie. starting IP our network in preferred and other networks starting IP as alternate.
i did try to connect the networks with a Ethernet wire through the vacant ports of existing switches and changing DNS settings but was unsuccessful.
Kindly assist please.|||My understanding of this is that the easiest way to do this is to have both networks in the same IP block. Set router1 in building 1 to 10.1.1.1 for example and have the DNS turned on.
Then put a switch or turn off DNS in router2 in building 2. Run an ethernet wire from one of the LAN ports on router1 to the WAN port in the switch or router2. Router1 will reassign IP addresses to all units in both groups. You will have to turn off all computers and restart them one at a time.
Another choice is to set router2 at 10.1.250.1 and turn its DNS on. Still run the ethernet wire from a LAN router1 port to the WAN port in router2. This will assign numbers 10.1.1.2 up (you can limit this to perhaps 100 computers) for the building 1. This will assign 10.1.250.2 up to computers in building 2.|||I will recommend you purchase two routers. Two Cisco 2600 routers (as an example only) could be configured to accomplish your task. Without routers your two networks can not communicate with each other.
Altering the DNS will not help either in that scenario.
Example: Router 1 Location 1
You set up a network. 10.1.241.x subnet 255.255.248.0 (10.1.241.x/21)
You would configure R1 to that network but then you would also add another network to connect the two routers together - 10.1.1.1 255.255.255.0
Now - 10.1.1.1 255.255.255.0 is going to connect to router two like such: 10.1.1.2 255.255.255.0 (notice host on first router is 1 and 2nd router is 2 )
You would repeat the process on the second router but you would use (obviously) the IP%26#039;s that pertain to that routers network.
NOT EXACT but here is an idea on Cisco router:
I%26#039;m using different IP scheme too.
R1#: interface fa0/0
ip addr 192.168.1.1 255.255.248.0
router rip
network 192.168.1.1
network 10.1.0.0
no shutdown
R2# interface fa0/0
ip addr 192.168.2.1 255.255.255.0
router rip
network 10.1.0.0
again, I left out a LOT of commands but this was simply just to give you an idea
How to connect these networks ?? Cheap and best solution ?? Kindly Help?
1st network having IP in series (16 computers)- This is my branch office
IP 10.0.x.xx
subnet as 255.255.248.0
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt; server--%26gt;PC--%26gt;switch--%26gt;PC .........
IInd network having IP in series (19 computers) - This is my office
IP 192.168.0.XXX
Subnet mask 255.255.255.0
wired and having static IP
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt; server--%26gt;PC--%26gt;switch--%26gt;PC .........
These two networks are nearby and about 15 mtrs apart (opposite buildings)
Is there any way to connect above two networks so that we may access all the computers existing on both the networks. Shall we require a router for that.
Or it may be achieved by putting IPs in DNS server address preffered IP and alternate server address IP ie. starting IP our network in preferred and other networks starting IP as alternate.
i did try to connect the networks with a Ethernet wire through the vacant ports of existing switches and changing DNS settings but was unsuccessful.
Kindly assist please.|||humm.. I like this question.. you could create a DHCP server on the Router or on your Windows 2003/2008 server to pulled the IP%26#039;s from the server or Router. If i was going to configure this network I would I would create a DHCP pool on the Router and configure it so that you have a flat sub net of 255.255.255.0 to combine both networks into one. Also to manage the switch you could if you want have a HTTP server configure or telnet in to the switch through a command prompt to look at the managed ports interfaces..
IP 10.0.x.xx
subnet as 255.255.248.0
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt; server--%26gt;PC--%26gt;switch--%26gt;PC .........
IInd network having IP in series (19 computers) - This is my office
IP 192.168.0.XXX
Subnet mask 255.255.255.0
wired and having static IP
Wired and having static IP
Interconnected through Ethernet wire and unmanaged switches
PC--%26gt; switch--%26gt;PC--%26gt;switch --%26gt; server--%26gt;PC--%26gt;switch--%26gt;PC .........
These two networks are nearby and about 15 mtrs apart (opposite buildings)
Is there any way to connect above two networks so that we may access all the computers existing on both the networks. Shall we require a router for that.
Or it may be achieved by putting IPs in DNS server address preffered IP and alternate server address IP ie. starting IP our network in preferred and other networks starting IP as alternate.
i did try to connect the networks with a Ethernet wire through the vacant ports of existing switches and changing DNS settings but was unsuccessful.
Kindly assist please.|||humm.. I like this question.. you could create a DHCP server on the Router or on your Windows 2003/2008 server to pulled the IP%26#039;s from the server or Router. If i was going to configure this network I would I would create a DHCP pool on the Router and configure it so that you have a flat sub net of 255.255.255.0 to combine both networks into one. Also to manage the switch you could if you want have a HTTP server configure or telnet in to the switch through a command prompt to look at the managed ports interfaces..
(DOMAIN HELP) Transfer my existing domain things like FTP Accounts, subdomains and such to my new host?
(I NEED HELP ASAP)
I was wondering since I am getting a new host and switching from my own one, I already own a domain and I am hosted by another site and such, but I am also hosting people with subdomains, from my domain, they get a subdomain, and an FTP account. Well since I will be switching to a better host, is there a way for me to transfer over the subdomains and ftp accounts or will they transfer automatically once i change the dns settings, i saved all my content to my computer and i will reupload them once we got our dns settings changed. I just need help trying to figure out how to change the Ftp accounts, and subdomains onto my new host without having to delete them and redo them all again, is there a such thing? and if so please explain how to do so... Thank you all in advance, I will choose the best answer that is given to me with exactly what I am looking for!|||As I know it is possible. You must first do backup from your current data and then transfer them to to your new web host. Honestly I am not aware of the details. You can get help from support team of web host you are transfering to.
However, if you are going to change your web hosting service, as an experienced webmaster I recommend BlueHost service which I’m sure it would work for you and fulfill all your requirements. They have a really great offer for hosting %26amp; I have used them for over 3 yrs now, and have never had a single problem with them.
They offer a Full-featured service only $6.95 a month. You can see their Plan Details accompanied with reliable reviews regarding their service at:
http://www.threehosts.com/reviews/1st
Here I have copied and pasted its features from their website to view:
- Free Domain Forever
- Unlimited Space
- Unlimited Transfer
- Host UNLIMITED Domains (Support All Domain Names)
- 2,500 POP/Imap Email Accounts
- SSH (Secure Shell), SSL, FTP, Stats
- CGI, Ruby (RoR), Perl, PHP, MySQL
- 2000/2002 Front Page Extensions
- Free Site Builder
- 24/7 Superb/Responsive Sales/Support
- Free Search Engine Submission
******IMPORTANT*******
* This service was awarded “The Best Web Host OF 2008”.
* If you sign up for this service you will have $100 credits to advertise your website with the google %26amp; yahoo search engines for free!
* You Can Register A Free Domain or Use Your Existing Domains. They Support All Domain Names.
****************************
Good Luck!
I was wondering since I am getting a new host and switching from my own one, I already own a domain and I am hosted by another site and such, but I am also hosting people with subdomains, from my domain, they get a subdomain, and an FTP account. Well since I will be switching to a better host, is there a way for me to transfer over the subdomains and ftp accounts or will they transfer automatically once i change the dns settings, i saved all my content to my computer and i will reupload them once we got our dns settings changed. I just need help trying to figure out how to change the Ftp accounts, and subdomains onto my new host without having to delete them and redo them all again, is there a such thing? and if so please explain how to do so... Thank you all in advance, I will choose the best answer that is given to me with exactly what I am looking for!|||As I know it is possible. You must first do backup from your current data and then transfer them to to your new web host. Honestly I am not aware of the details. You can get help from support team of web host you are transfering to.
However, if you are going to change your web hosting service, as an experienced webmaster I recommend BlueHost service which I’m sure it would work for you and fulfill all your requirements. They have a really great offer for hosting %26amp; I have used them for over 3 yrs now, and have never had a single problem with them.
They offer a Full-featured service only $6.95 a month. You can see their Plan Details accompanied with reliable reviews regarding their service at:
http://www.threehosts.com/reviews/1st
Here I have copied and pasted its features from their website to view:
- Free Domain Forever
- Unlimited Space
- Unlimited Transfer
- Host UNLIMITED Domains (Support All Domain Names)
- 2,500 POP/Imap Email Accounts
- SSH (Secure Shell), SSL, FTP, Stats
- CGI, Ruby (RoR), Perl, PHP, MySQL
- 2000/2002 Front Page Extensions
- Free Site Builder
- 24/7 Superb/Responsive Sales/Support
- Free Search Engine Submission
******IMPORTANT*******
* This service was awarded “The Best Web Host OF 2008”.
* If you sign up for this service you will have $100 credits to advertise your website with the google %26amp; yahoo search engines for free!
* You Can Register A Free Domain or Use Your Existing Domains. They Support All Domain Names.
****************************
Good Luck!
DNS redirect?
At present i have two domain names pointing to the same webspace. (say newsite.com and newsite2.com)
How do i get one domain name to point to a particular folder say www.bytebox.co.uk/newfolder by changing the DNS settings?
Is it possible to make it so if the site is forwarded to www.bytebox.co.uk/newfolder/page1/index.鈥?the page displays as www.newsite.com/page1/|||You need to use host headers on the HTTP server....|||For IIS see this link:
http://www.iisfaq.com/Default.鈥?/a>
For Apache:
http://apache.active-venture.c鈥?/a>
How do i get one domain name to point to a particular folder say www.bytebox.co.uk/newfolder by changing the DNS settings?
Is it possible to make it so if the site is forwarded to www.bytebox.co.uk/newfolder/page1/index.鈥?the page displays as www.newsite.com/page1/|||You need to use host headers on the HTTP server....|||For IIS see this link:
http://www.iisfaq.com/Default.鈥?/a>
For Apache:
http://apache.active-venture.c鈥?/a>
Report Abuse
How to bypass opendns filters on a mac?
i have a macbook and i want to go on youtube but opendns is blocking it. Ive tried proxies which let me get on facebook but i cant watch any videos on youtube. Maybe there%26#039;s some settings i can change or something that would help? I tried to change my dns settings on my computer but it wont let me click on anything? Thanks for your help.|||OpenDNS is rock solid and there is no way around it.|||Chances are your parents have setup OpenDNS filters. The only way to get around this is to set your computer to use another DNS service instead. Since I don%26#039;t want overrule your parents decision I%26#039;m not going to tell you how to do such a thing.|||Hey, Iv recently had the same problem as you when trying to get onto websites that have been blocked by my school. I was told about this working random proxy
http://sweetwind.cz.cc/
and it actually works! Im now surfing facebook and myspace at school without having the teachers bother me
give it a try
the best free proxy software to unblock ur faviourte sites and change ur IP
it assures to be online, private, secure, and anonymous
download it form here
http://sharecash.org/download.php?file=6鈥?/a>
Subscribe Us by Email-new proxies Delivered by us to your e-mail every single day
http://feedburner.google.com/fb/a/mailve鈥?/a>
http://sweetwind.cz.cc/
and it actually works! Im now surfing facebook and myspace at school without having the teachers bother me
give it a try
the best free proxy software to unblock ur faviourte sites and change ur IP
it assures to be online, private, secure, and anonymous
download it form here
http://sharecash.org/download.php?file=6鈥?/a>
Subscribe Us by Email-new proxies Delivered by us to your e-mail every single day
http://feedburner.google.com/fb/a/mailve鈥?/a>
How can I make ME stop locking up my router after about 20 minutes.?
I have 3 systems attached to the router. 1 is running Win %26#039;95SE, another is running XP, and the culprit is running ME. It locks the router up after 20 minutes and the router has to be turned off and back on. I have tried it with Ethernet, USB, and wireless and re-installed Explorer and ME. Some one suggested that my winsock file might be corrupted but it has been replaced. SOme one suggested that I change my DNS settings but I tried it.|||ME sucks, get rid of it.|||Has nothing to do with ME. m0%26#039;s answer is best.
|||Better just to put Win98 or XP on that computer...|||Try pgrading your firmware for your router..
IF it locks up like that, it is damaged, Please return your router.
It doesn%26#039;t matter what computers are connected... A router is a router with DHCP server. It just sends responses to the network. It doesn%26#039;t care what os your running12|||Upgrade to windows Xp or use Ubuntu OS (Linux Desktop)|||Many you should try a different company or get rid of the one that is locking the router up. So you can use the other two and many find another one that doesn%26#039;t lock the router.
Report Abuse
|||Better just to put Win98 or XP on that computer...|||Try pgrading your firmware for your router..
IF it locks up like that, it is damaged, Please return your router.
It doesn%26#039;t matter what computers are connected... A router is a router with DHCP server. It just sends responses to the network. It doesn%26#039;t care what os your running12|||Upgrade to windows Xp or use Ubuntu OS (Linux Desktop)|||Many you should try a different company or get rid of the one that is locking the router up. So you can use the other two and many find another one that doesn%26#039;t lock the router.
How do I transer my domain name from WebzPro to another site?
I have a domain name registered through WebzPro, but want to transfer it to Blogger. I know I have to change the DNS settings, but I%26#039;m a bit illiterate when it comes to this kind of stuff. Help!|||In this site http://www.tucktail.com/ you can transfer the Domain name.
How can I configure my IP/DNS settings.?
I%26#039;m trying to hook up my new computer to the internet, but I need to change the IP settings to connect to my modem. Where do I change these. Any help would be greatly appreciated.|||Click on Start.
Go to Control Panel.
Click on Network Connections.
Right click on Local Area Connection then go to Properties
Highlight Internet Protocol then click on the Properties button.
Go to Control Panel.
Click on Network Connections.
Right click on Local Area Connection then go to Properties
Highlight Internet Protocol then click on the Properties button.
My computer's DNS settings?
My computer, laptop, Wii, and notebook cannot retrieve my DNS settings automatically, I have to set them myself by looking at my service providers thing. My laptop belongs to my school, so it has administrator preferences. I can%26#039;t change the settings myself because of those preferences, so I need to know how how to get my DNS to work properly. I%26#039;ve reset, reinstalled, and tried lots of different ways. It suddenly started doing this one night, out of nowhere, so I need to know how to make it back to normal. I%26#039;m not a technical genius or anything (I use Windows Vista), so easy walkthrough%26#039;s would be nice.|||You should be able to change the settings on your router itself, then all of your devices will use the same settings. It sound like your router has not reset in a while or is having a problem retreiving the information from your service provider. change the settings in the router for dns from automatic to manual and enter the dns addresses manually then save, everything should work fine.
Client has bought domain at 123-reg and hosting at 1and1 how do i change the domain to 1and1 (DNS settings)?
You will need to access the domain name settings via 123-reg and change the nameservers to those provided by 1and1. If you do not know them, email the 1and1 support and they should be happy to provide you with them.
When setting up a dedicated mail server, how should I set up my DNS settings on the primary and new server?
Concerning the mx record, that is already being managed by a 3rd party name service provider. It will not have to change since we are not getting a new external IP address. A representative from that company, though, said that some DNS settings will have to change on my end to make sure that mail is routed properly to the new server instead of the old (primary) server where we are currently set up using different mail server software. (We are transitioning from MailEnable to MS Exchange Server 2007).
Can anyone offer any advice concerning these DNS settings? Or do you have any other useful tips to help me have a smoother transition? (I didn%26#039;t install our first mail server, and this is my first time installing Exchange Server).
Thanks,
Riven|||Riven,
Non-microsoft DNS servers that are authoratative on your network must support 2 DNS standards; service resource records and the DNS dynamic update protocol.
Outlined in RFC 2052, a service resource record (SRV RR) is a type of DNS record that enables DNS to recognize multiple servers in a single domain and to locate commonly used TCP/IP services that are associated with specific servers. SRV RRs allow a DNS server to generate a list of network servers that provide TCP/IP services and the protocols supported by those servers, and to determine a preferred server for a specific service, such as Microsoft Exchange.
The SRV record is formatted to include information about the service that is provided by a server, the domain that is serviced by a server, and the protocol used by the server.
The DNS Dynamic Update Protocol is outlined in RFC 2136 and enables information in a DNS server to be automatically updated, i.e., enabling a W2K Pro workstation to update its DHCP-leased IP address
The last piece of advice I can give you is to trust your software. MS Exchange is pleasantly intuitive and forgiving as long as your ducks are in a row. By that I mean your primary DNS server is (or should be) the authoratative server for that zone. This means that all changes to the zone, the creation of address (A) resource records, new SRV resource records, and so forth must be made on that DNS server.
You have the option to create one or more backup DNS servers, called secondary DNS servers, for a primary DNS server. A secondary contains a copy of the primary%26#039;s zone database, but is not used for administration.
Make sure that you complete two steps in the windows 2k server environment. First, configure W2K DNS zones in a domain particularly the forward and reverse lookup zones, to accept dynamic updates by opening the DNS tool in administrative tools, displaying the zone and its child objects in the tree, displaying the child objects under the domain, right clicking the domain under the zone, and clicking properties. Second, if you%26#039;re using DHCP Riven, configure it to dynamically updateDNS or to have clients perform the dynamic update. To configure DHCP, open the DHCP tool in the Administrative Tools, right-click the DHCP server in the tree, click properties, and click the DNS tab. Please don%26#039;t be offended if I%26#039;ve repeated a lot of what you already know, I just meant to cover all the bases. Good luck.|||Hope this helps?
http://technet.microsoft.com/en-us/libra鈥?/a>
Can anyone offer any advice concerning these DNS settings? Or do you have any other useful tips to help me have a smoother transition? (I didn%26#039;t install our first mail server, and this is my first time installing Exchange Server).
Thanks,
Riven|||Riven,
Non-microsoft DNS servers that are authoratative on your network must support 2 DNS standards; service resource records and the DNS dynamic update protocol.
Outlined in RFC 2052, a service resource record (SRV RR) is a type of DNS record that enables DNS to recognize multiple servers in a single domain and to locate commonly used TCP/IP services that are associated with specific servers. SRV RRs allow a DNS server to generate a list of network servers that provide TCP/IP services and the protocols supported by those servers, and to determine a preferred server for a specific service, such as Microsoft Exchange.
The SRV record is formatted to include information about the service that is provided by a server, the domain that is serviced by a server, and the protocol used by the server.
The DNS Dynamic Update Protocol is outlined in RFC 2136 and enables information in a DNS server to be automatically updated, i.e., enabling a W2K Pro workstation to update its DHCP-leased IP address
The last piece of advice I can give you is to trust your software. MS Exchange is pleasantly intuitive and forgiving as long as your ducks are in a row. By that I mean your primary DNS server is (or should be) the authoratative server for that zone. This means that all changes to the zone, the creation of address (A) resource records, new SRV resource records, and so forth must be made on that DNS server.
You have the option to create one or more backup DNS servers, called secondary DNS servers, for a primary DNS server. A secondary contains a copy of the primary%26#039;s zone database, but is not used for administration.
Make sure that you complete two steps in the windows 2k server environment. First, configure W2K DNS zones in a domain particularly the forward and reverse lookup zones, to accept dynamic updates by opening the DNS tool in administrative tools, displaying the zone and its child objects in the tree, displaying the child objects under the domain, right clicking the domain under the zone, and clicking properties. Second, if you%26#039;re using DHCP Riven, configure it to dynamically updateDNS or to have clients perform the dynamic update. To configure DHCP, open the DHCP tool in the Administrative Tools, right-click the DHCP server in the tree, click properties, and click the DNS tab. Please don%26#039;t be offended if I%26#039;ve repeated a lot of what you already know, I just meant to cover all the bases. Good luck.|||Hope this helps?
http://technet.microsoft.com/en-us/libra鈥?/a>
How do I get the IP Address for my Yahoo domain to change servers?
My web designer wants me to change the DNS settings for the Yahoo domain name I have.|||login to your yahoo domain account manager / control panel and view it .
or if the site is live , you might try querrying it at www.domaintools.com or whois.webhosting.info etc
or if the site is live , you might try querrying it at www.domaintools.com or whois.webhosting.info etc
Hi, from last week I faced "DNS ERROR" which caused me alot of troubles. How to covercome it?
I don%26#039;t have access to uncensored internet and I got advised to change DNS settings under TCP/IP4. But it didn%26#039;t solve my problem, so I change that to its default settings (Obtain DNS Server Adress Automatically). Problem is when I%26#039;m Connected to the Internet after almost 2 hours, DNS error occurs and befor I can do something, It makes my PC to shutdown immediately. (Blue screen system halt appears and then Shutdown. All these processes are taken in less than 1 second).
Any useful idea is highly appreciated.
Thanks in advanced.
P.S. I%26#039;m using Windows 7. Even after reinstalling it, problem insist to annoy me.|||If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
If your Network Administrator has enabled it, Microsoft Windows can examine your network and automatically discover network connection settings.
If you would like Windows to try and discover them,
click Detect Network Settings
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.|||Microsoft advises to not use windows 7 as your primary operating system. Try the win 7 trouble shooting forums.
Any useful idea is highly appreciated.
Thanks in advanced.
P.S. I%26#039;m using Windows 7. Even after reinstalling it, problem insist to annoy me.|||If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
If your Network Administrator has enabled it, Microsoft Windows can examine your network and automatically discover network connection settings.
If you would like Windows to try and discover them,
click Detect Network Settings
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.|||Microsoft advises to not use windows 7 as your primary operating system. Try the win 7 trouble shooting forums.
In windows 2000 on a domain DNS settings won't allow me to have internet and group policy at the same time
I%26#039;ve got many useful answers here on yahoo answers from you guys. Thank You. My windows 2000 network is working except one thing. When I log in the domain from the workstation I want windows to load the custom group policy settings that I created in active directory. I can do that easily IF I repeat IF I set the DNS IP address in tcp/ip settings to the one that I%26#039;m running on the server. I%26#039;m also using internet sharing on the server and I%26#039;d like to access the internet from the workstation. BUTTTTT it only works if I change the DNS settings to my router%26#039;s ip address. So I either have gpo applied OR have internet because each feature requires it%26#039;s own DNS setting. How can I have both? I have to have GPO applied so I can restrict the user%26#039;s environment and I have to have internet on the workstations. I have 2 NIC in the server by the way and I enabled the internet sharing on the NIC that is connected to the router that is the internet (if this info help). Thank you for your help you guys.|||u need to move internet connection sharing off of ur domain controller,, thats just not right at all; security and config wise. Ideally the DC should be the DC and not to much more,, possibly running DNS/DHCP in some minimalist configs but NAT/Internet connection sharing no I don%26#039; t even think thats available on the domain controller servers in windows. and anything u want to access the internet needs to be pointed at ur default gateway. If u know to point the server to the router to access the internet what are u sharing the internet for? i just don%26#039;t get that one. Who configured this network? Ok GPO%26#039;s are set on the domain controller and are attached to active directory container objects like OU%26#039;s or groups,, in fact from what ur explaining it sounds more like ur in a work group model than a domain and if thats the case u can%26#039;t apply GPO%26#039;s to others PC%26#039;s only to urs ,, if u r in a domain environment,, someone has seriously confused ur set up
Id be so fired if my users could either access internet or have GPO%26#039;s enforced,, heh try running gpresult from the command line of a PC that %26#039;should be a policy client%26#039; and see what u get,,, if u don%26#039;t see any of ur resultant policies then u know nothing has been configured.
Id be so fired if my users could either access internet or have GPO%26#039;s enforced,, heh try running gpresult from the command line of a PC that %26#039;should be a policy client%26#039; and see what u get,,, if u don%26#039;t see any of ur resultant policies then u know nothing has been configured.
The internet isn't working because of the DNS (domain name server). How can i change the settings? ?
I tried to connect to the internet and it didn%26#039;t work. I clicked on diagnose and repair and it said it%26#039;s because of the DNS (domain name server) and the problem has to be solved manually. I don%26#039;t know how to solve it. I don%26#039;t even know how to access the DNS settings. I%26#039;m not even sure if that%26#039;s the problem but i tried everything from turning windows firewall off to connecting to a different network, so i guess there%26#039;s nothing left but this.
NOTE:
I%26#039;m using windows vista home premium. I have this problem on my laptop. I%26#039;m using a wireless connection. I don%26#039;t know much about computers so i%26#039;d appreciate some help.|||I really appreciate it when people actually describe their problem like you just did and provide relevant information. With this information, I think I can actually help. Thanks.
If you click on the Start menu and go to the Control Panel you can click on the Networking and Sharing Center. On the left hand side there should be a task pane. Click on the option that says `Manage Network Connections`. In the new window that opens up, right click on your connection and choose Properties. Under both the TCP/IPv4 and TCP/IP/v6 Properties menus, you should click on `Obtain an IP address automatically`. To be safe, you should disable and then re-enable the connection before testing.
If this doesn%26#039;t work, you can go to a different computer on your LAN with proper DNS settings and go the Start menu and choose the Run command. Type in
ipconfig /all
Write down the DNS servers and go back to the computer with the incorrect DNS settings. Back under the Properties windows for both the TCP/IPv4 and TCP/IPv6 options you can click the button that says `Use the following DNS server addresses` and enter the addresses in the field beneath it.
NOTE:
I%26#039;m using windows vista home premium. I have this problem on my laptop. I%26#039;m using a wireless connection. I don%26#039;t know much about computers so i%26#039;d appreciate some help.|||I really appreciate it when people actually describe their problem like you just did and provide relevant information. With this information, I think I can actually help. Thanks.
If you click on the Start menu and go to the Control Panel you can click on the Networking and Sharing Center. On the left hand side there should be a task pane. Click on the option that says `Manage Network Connections`. In the new window that opens up, right click on your connection and choose Properties. Under both the TCP/IPv4 and TCP/IP/v6 Properties menus, you should click on `Obtain an IP address automatically`. To be safe, you should disable and then re-enable the connection before testing.
If this doesn%26#039;t work, you can go to a different computer on your LAN with proper DNS settings and go the Start menu and choose the Run command. Type in
ipconfig /all
Write down the DNS servers and go back to the computer with the incorrect DNS settings. Back under the Properties windows for both the TCP/IPv4 and TCP/IPv6 options you can click the button that says `Use the following DNS server addresses` and enter the addresses in the field beneath it.
How do i change the settings on my wireless router so that it automatically finds and selects the DNS server?
I just moved but my router keeps selecting the old DNS server and I can%26#039;t figure out how to get it to detect the new server automatically.|||Well each router%26#039;s interface is unique so I can%26#039;t give you specific instructions for your router without knowing which kind it is.
Not all internet connections are good about assigning the appropriate DNS entries via DHCP. If you happen to know the correct DNS servers, you should be safe to specify them manually inside the router%26#039;s interface. If you do not know your ISP%26#039;s DNS servers, you could use OpenDNS%26#039;s servers. They%26#039;re free DNS servers that work with practically any ISP. Some router companies use them by default.
The OpenDNS servers are:
208.67.222.222
208.67.220.220
You can find more info about this at http://www.opendns.com/|||But is your Internet connection working? If you are using the same ISP, the DNS server IPs may not change.|||At least give us the manufacturers name and model number of the router. There are more than a few different models, and not all have the same abilities
Not all internet connections are good about assigning the appropriate DNS entries via DHCP. If you happen to know the correct DNS servers, you should be safe to specify them manually inside the router%26#039;s interface. If you do not know your ISP%26#039;s DNS servers, you could use OpenDNS%26#039;s servers. They%26#039;re free DNS servers that work with practically any ISP. Some router companies use them by default.
The OpenDNS servers are:
208.67.222.222
208.67.220.220
You can find more info about this at http://www.opendns.com/|||But is your Internet connection working? If you are using the same ISP, the DNS server IPs may not change.|||At least give us the manufacturers name and model number of the router. There are more than a few different models, and not all have the same abilities
I signed up for my domain name through Yahoo. Now I want to change the dns settings. How do i do this?
What you want to know comes under CNAME record. Follow the directions at Yahoo! Help:
http://help.yahoo.com/help/us/domains/do鈥?/a>
http://help.yahoo.com/help/us/domains/do鈥?/a>
How to change DNS server when using a router?
I have an ADSL router and when i was installing comodo firewall, it asked to changed the DNS server to something else. I answered yes. but is it really possible to do without changing router settings from the router configuration page?
if yes, does that means i have to change it manually?|||If the COMODO firewall is just used on your machine, you can change your machines DNS settings without changing the routers dns... its under advanced settings in the TCP/IP section of your network adapter. Your computer has a setting for the DNS to use. Running off a router it is usually set to the routers IP, but it does not have to be.
Here is how for Windows XP
http://support.microsoft.com/kb/305553
Vista and Win 7 are very similar as well.
Linux sets the DNS in the resolv.conf file on your local machine as well.
http://www.cyberciti.biz/tips/linux-how-鈥?/a>
You will need to login to the router to change the routers DNS. Usually that is no big deal.|||hi
yes i am afraid it does this sounds like a bit of a hoax, the router applies for connection using the isp%26#039;s DNS server. Are you going to change your ISP
if yes, does that means i have to change it manually?|||If the COMODO firewall is just used on your machine, you can change your machines DNS settings without changing the routers dns... its under advanced settings in the TCP/IP section of your network adapter. Your computer has a setting for the DNS to use. Running off a router it is usually set to the routers IP, but it does not have to be.
Here is how for Windows XP
http://support.microsoft.com/kb/305553
Vista and Win 7 are very similar as well.
Linux sets the DNS in the resolv.conf file on your local machine as well.
http://www.cyberciti.biz/tips/linux-how-鈥?/a>
You will need to login to the router to change the routers DNS. Usually that is no big deal.|||hi
yes i am afraid it does this sounds like a bit of a hoax, the router applies for connection using the isp%26#039;s DNS server. Are you going to change your ISP
How to change my DNS settings in Vista?
I want to change my DNS numbers but I don%26#039;T how to do help pls?
Thanks.|||You can use the Command Prompt shortcut on the Start menu or you can type CMD in the Run dialog box on the Start menu . When the Command Prompt window appears type in ipconfig /renew.
All this does is refresh it, changing it requires you to call your isp and request a change but this isn%26#039;t necessary.
More info from Microsoft:
http://support.microsoft.com/kb/314850
Great read:
http://malaysia.answers.yahoo.com/questi鈥?/a>
Thanks.|||You can use the Command Prompt shortcut on the Start menu or you can type CMD in the Run dialog box on the Start menu . When the Command Prompt window appears type in ipconfig /renew.
All this does is refresh it, changing it requires you to call your isp and request a change but this isn%26#039;t necessary.
More info from Microsoft:
http://support.microsoft.com/kb/314850
Great read:
http://malaysia.answers.yahoo.com/questi鈥?/a>
How to disable the changing of dns settings?
I am addicted to porn and found a way to block it via dns, but i can easily change it so i need to block the ability to change dns settings so i can stop.|||if your running a windows box, look into windows policies. however if you have administrative rights on your machine to create policies, then those can be changed too. Why don%26#039;t you see if you%26#039;re ISP has something to offer, like a filtering service, you have to pay for it, but maybe they can handle the filtering upstream from you without your intervention.
I change DNS settings to install google adsense in my domains, it appears error 404, how do I solve this?
Sounds like you are referring to Adsense for domains.
I am not sure what/where you did it, but it sounds like you tried to change the DNS in your hosting account (c panel?)
You can%26#039;t do this - won%26#039;t work.
You need to do it on your domain registrar account.
I am not sure what/where you did it, but it sounds like you tried to change the DNS in your hosting account (c panel?)
You can%26#039;t do this - won%26#039;t work.
You need to do it on your domain registrar account.
Subscribe to:
Posts
(Atom)